50W Co2 Laser Engraving Machine Engraver Cutter 20x12+CW3000 Water Chiller

  

50W Co2 Laser Engraving Machine Engraver Cutter 20"x12"+CW3000 Water Chiller. This 50W CO2 laser cutter continues to uphold our high standards with its proprietary advanced control panel, long-lasting Reci laser tube, digital laser power supply, large 30x50 cm working area and allow even larger pieces to be worked on. Start marking, engraving, and cutting your designs onto and into wood, paper and cardboard, plastics and acrylic, leather, fabric, and other nonmetallic materials more quickly and efficiently than ever before with our intuitive controls, custom designed for our machines. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality on a large scale.

Simply upload your designs using the included software or via the USB2.0, U disk, wifi, choose your substrate, and the laser will engrave and cut your design with pinpoint precision. In addition to its quality, durability, and the usual long service life.

The laser with a red light positioning and it mounts on the laser head which shows the laser path of the machine and can offer more precision when lining up cutting and engraving. What's more, a digital power supply providing stable high-voltage current and real-time information on your engraver's status. Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys. And Triple security protection-Blowing flame retardant, water cut protection, open cover protection can make you in a safe environment to process it.

When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and quick transport. The TL-A1 is a motion control system for small laser engraving and cutting machines, based on 2.4 color screen design, with more optimized space design. Support 3-axis motion control and 1-way laser control, equipped with laser engraving and cutting software. Export menu, support custom development. Laser tube provides 50W of power for up to 3000 hours. Reads flash drives while the other connects directly to your PC via dedicated cable. The Ethernet port allows you to. Gives you plenty of space to work on wood, rubber, plastic, paper, fabric, leather, c. Eramics, tile, fiberglass, marble, stone, and more-even before you open the integrated pass-through doors that permit you to work on even larger pieces! Engrave or cut almost all non-metallic materials.

Supports USB2.0, offline U-Disk and WIFI to transfer data. A large, fully transparent acrylic plate observation window. The whole working area and the working process come into view.

The power supply is equipped with an LCD display. The LCD display shows the current and automatically detects errors.

When problems occur, you can troubleshoot according to the instructions. The power supply and motherboard of our machine are installed separately to effectively avoid magnetic interference. The performance of the machine can be kept optimal. No additional installation required, simplifies installation. Gases and heat in the working area.

Making engraving and cutting always efficient and accurate. The speed, power and other settings can be adjusted through the control panel. With the raster graphic/color vector assignment system.

You can adjust the engraving speed and power by color coding. Reinforced and more robust machine housing ensures safe transportation and longer service life.

A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine's path, and identifies positioning sizes, allowing an effortless project setup process. A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. The widened viewing window is made from. To ensure lasting safe use. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety.

Close the cover and press Start to resume your work. The water cut protection system protects the laser tube from being burned out. If the water cooling system fails suddenly, the temperature of the laser tube will rise. At this moment, the water protection system will immediately cut off the power supply to the laser tube to prevent the laser tube from being burned out. The E-Stop safety button immediately stops the machine in case of emergency.

Tool lets you quickly correct the focus of your laser directly from the control panel without any need to bother with troublesome acrylic tools and tedious manual adjustment. A red light indicates that the machine is working and needs to pay attention to safety; A green light indicates that the machine is ready to work.

Front and Rear Double-pass Doors. The worktable can be moved up and down to fit a variety of engraving materials and products. Honeycomb Cutting Platform - The honeycomb cutting platform is suitable for various engraving and cutting object sizes.

The honeycomb plate has the advantages of light weight, high strength, good rigidity, high flatness, not easy to damage and deform. The honeycomb plate overcomes the shortcomings of the original aluminium work table, which is easy to buckle and not resistant to high temperature and deformation. We have warehouses in UK and choose from the nearest warehouse to.

After you have ordered, you must pay within 7 days. We offer detailed product descriptions and images to give you a real advantage in finding the products you're looking for. With a cutting edge online operating system and. If you do not like the goods and would like to return them to us, please see below. Before returning the goods to us, please tell us first.

Please return the goods to us within 7 days after you have received the goods. Please confirm the goods as original packing. Ut please do not forget to. Send us some clear photos.