800W 4 Axis CNC3040 Router Engraver Metal Milling Engraving Cutting Machine 220V

  

4Axis 800W CNC 3040 Router Engraver Metal Milling Engraving Cutting Machine 220V. This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver.

These issues are detailed and fully explained on the Mach3 Software website. This CNC 3040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.

It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. Like aluminum, copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.

The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer, scanner... With the assist of the CNC ROUTER 3040T, your design idea will be real-time display. The engraver will come with MACH3 softwareFree Version If you followed the intsalation tips offered by us, it works like full version. The software perferm better on the 32bites system computer.

Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software. (This is very important) Otherwise, the antivirus will regards the cnc software is virus and stop the installation. Please don't update the software when installed, then it will not need the license Numbers. X, Y, Z Working Area 400(Y)295(X)80(Z)mm Outside dimension 630505495mm(LWH) Table size 550(Y)360(X)mm Lathe structure 6061/6063 Aluminium alloy Max.

X axis SFU01204-4 Ball Screws Y axis SFU01204-4 Ball Screws Z axis SFU01204-4 Ball Screws. X axis High intensity Chromeplate shaft Y axis High intensity Chromeplate shaft Z axis High intensity Chromeplate shaft St. 1, Water cooled spindle motor can work longer time than air cooled motor.

2, Water cooled spindle motor has higher stability and better concentricity than air cooled motor. The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC220V) 3. Please don't change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Outside dimension 65158mm Material 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power AC220V, 5A, 0.8KW VFD Spindle speed: 24000 rpm Max working frequency 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model ER11-A Cooling Water-cooling Speed mode By adjusting the VFD output voltage and operating frequency from 0-24000RPM Lubrication way lubricated by high grease Repeat accuracy 0.05mm Spindle precision radial beat acuities 0.03mm Carving Instructions G code / TAB files / nc file / NCC files Communication interface through parallel connection with computer Software environment Windows XP, 32Bits Maximum Idle speed:1500mm/min Working Speed :50-1500mm / min (different material with different speed settings) Control box parameters: Operating Voltage AC220V Control unit Toroidal transformer + PWM power supply module + TB6560 stepping motor drive Computer connection Parallel port Command code G code Acceptable software Mach3 Protection Emergency stop button. 1, The NEW 0.8KW water-cooled VFD is available operating for long time, which can reinforced the processing abilty of the machine and can be used to process aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision.

Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a 25pin parallel port output. Place the contral box in a ventilated dry place where there is no dust, no moisture 4.

Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise, It will damage the driver of the controller. Correctly instal the Spindle motor and the heat pump.

The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Installing a CNC control software and Drive such as the MACH 3 on your computer. Fllowing our manual or guideline to set uo the software. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.

You can enjoy making you dream with using our CNC machine now. Feedback is very important to us.

It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.

Stable performance and high quality. X, Y, Z Working Area.

400(Y)295(X)80(Z)mm.