ATOMSTACK X20 Pro Engraving Cutting Machine for Wood Metal Stainless E0F7

  
Features: Eye Design: The panoramic filter protective cover plays a very role in protecting your eyes, filtering 97% of the ultraviolet, you can also watch engraving without wear. Reduce the cost of your and the inconvenience of wearing. Easy Installation: The all- alloy anodized structure design makes the machine more, and the assembly can generally be completed within 20-30 minutes. High : World's first 20W optical engraver. The output soars up with the latest of four 6W coupling technology, is able to cut off 12-15mm thick tungsten board as well as the 8mm thick black acrylic board with only pass, and the 0.05mm thick stainless steel sheet. Upgrade Air Assist Kit: The cutting capacity is greatly improved, as well as the cutting accuracy and quality is optimized to a considerable extent. Upgraded : No need to adjust the before engraving. The focusing area of the new is only 1/3 of other ordinary lasers.

Combine engraving and high energy cutting at the same. The of the fixed- is more stable than the zoom. Precise Scale Lines : There are precise scale lines on the X- and Y- to facilitate quick length measurement. 400x400mm large area engraving interval can meet your various engraving needs.

Wide Compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP/ 7 /8 / XP / 10, and also support system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. More Function: Uses an integrated screw rod which makes the movement of the more precise and the coupling more. Support offline engraving; In the event of an unexpected situation, stop the machine at any to make the engraving safer. The sintering is up to 2400?

Specification: Model: ATOMSTACK X20 PRO Recommend Print Size: 400x400mm Carving Objects:Wood, bamboo, cardboard,, leather, board, oxide, non-reflective, Electroplating layer and paint surface layer metal, 304 mirror stainless steel,, ceramics, cotton cloth, slate; Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin board, sponge; Machine : 130W electric : 90W output : 20-21W Length: 445 ± 5nm Engraving accuracy: 0.01mm Focusing method: fixed, no need to protective cover: the user's eyes and pets from grabbing the. Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format: NC, BMP, JPG, PNG, DXF, etc. Data transmission method: USB connection.

Input Voltage: AC100-240V, 50/60Hz Output Voltage: DC12V, 5A Package Size: 57 x 52 x 18cm/22 x 20.4 x 7in Package Weight: 10.6kg/23.3lb Packing List: 1 x Air Assist Accessory 1 x Mounting Screw 1 x Tool Kit 4 x Foot Pad Foam 1 x Film 3 x Acrylic Sheet 3 x Wood Chips 10 x Wire Tie 1 x Desiccant 1 x Brush 1 x Cloth 1 x 1 x TF 1 x 1 x Instruction 1 x Data Line 1 x Screen 1 x High Definition Interface Cable 1 x Module 1 x Cutting Pad 1 x x Assembly 1 x y Left Profile 1 x y Right Profile 1 x Profile On The Base 1 x Under The Base Profile 3 x Foot Bracket.