Power supply : 24V 5.6A. Support System: Windows XP / Win 7 / Win 8 / Linux.
Drill bits: tip 0.1mm, 20 degree, diameter3.175mm. Laser: 500mw 405nm, 12v / 2500mw 450nm, 12v / 5500mw 450nm, 12v. GRBL 1.1F USB port cnc engraving machine control board, 3 axis control.
24VDC (only support 24VDC input). MOSFET recommendation 24V DC, current : within 10A.
Maximum current of 2A or less, is recommended within 1.5A and additional heat. (any nema17 or nema23 stepper motor). Windows XP / Win 7 / Win 8 / Win 10 (32/64 can be). 5.5-2.5mm DC interface. Add emergency stop button port, probe port, XYZ limit port and add the power button switch.
MOSFET recommendation 24V, current : within 10A. 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. 775 spindle motor (12-36V) 24V:10000rpm/min.
M4 screw hole; Mounting hole pitch: about 29mm. ER11-3.175mm (can be replaced 0-7mm).
DC 24V 5.6A power adapter (input voltage 110-240VAC). Support oftware: GRBL controller, Candle, UniversalGcodeSender. Add emergency stop button port, tool probe port and XYZ limit port. The spindle supports 0-100% adjustable PWM power. Support limit switch, tool setting, steering gear, cooling fan and other functions.Support PWM / TTL signal control, power 0-100% adjustable! Increase the power button switch. Cancel the drive module, integrate the imported stepper motor drive, no need to worry about module damage.
And integrated heat dissipation aluminum alloy. Add offline recognition function, you can insert offline module and computer at the same time.
The machine will automatically recognize whether it is controlled by the computer. Can support 20,000 rpm spindle. Add the fan port to force heat dissipation.