When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting. Eye conservation and Safety Design: Equipped with a detachable eye, which will not even without glasses. If you don't need it, you can easily disassemble it.
The presented A4 size steel pad can well the table from damage. There is a very and eye-catching switch on the machine, you can directly and quickly turn off the in an. Sturdy and Frame: The S30 series is made of high-strength alloy, its frame can bear to 50KG weight without damage, and is very.
The frame can be used for a long and maintain high, only need to upgrade the latest when the machine needs to be upgraded. And there are precise scale lines on the X- and Y- which is convenient for you to quickly measure the size of the engraved object. Specification: Model: SCULPFUN S30 MAX Input: AC, 50/60HZ Output: 24V 5A Engraving accuracy: 0.005mm Engraving area size: 410400mm Machine : about 120W Diode output : 20W (note that this is energy not electrical energy) : 0.08x0.1mm wavelength 455±5nm Focusing method: fixed column + sliding device conservation cover: Equipped with a detachable conservation cover to the eyes. You can adjust it and down, or remove the.
Pump: Type: mainboard-controlled pump, voltage 24V, 30L/min hose inner diameter: 7.5mm Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF,, cardboard,, leather, board, oxide, 304 stainless steel, ceramic, dark stone Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some boards, boards Operating software: LightBurn (with assist function), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support system, support system. Supported file formats NC, BMP, JPG, PNG, DXF and other formats.
Data transmission method: USB connection or connection Package Size: 62.3x24x22.5cm/24.5x9.4x8.8in Package Weight: 7530g/16.6lb Precautions:? Because of the powerful, it is forbidden to run the engraving machine without being supervised. Pause it if you're not around.
For detailed machine instructions, please refer to the manual for parameter settings. When operating the engraving machine, please install the protective cover; if it is not installed, you need to wear. Do not the with your hands, otherwise you may burn your hands.
Please strong impact on the machine. It is forbidden for children under 14 years old to use this product, and over 14 years old need supervision. Do not apply the directly to any specular reflection object, which may cause injury to the operator or burn the. Packing List: 1 x S30 Po Max 1 x Kit 1 x 24V automatic pump 3 x A4 size 3mm wooden board 2 x Limit Switch 1 x 24V 5A 1 x cord 1 x USB cable 1 x tube 1 x Installation tool Kit 1 x 1 x A4 metal backing plate Step 1-6 Install the package 1 x Manual 1 x X- assembly 2 x X profiles 2 x Y profiles 1 x Control Box Assembly 3 x support feet OS6678UK.