Engraving Cutting Machine

UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine


UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine
UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine

UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine    UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine

3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine. Welcome European customers to our shop. 2-4 days to: Austria, France, Spain and Italy. 4-5 days to: Other Europe Countries. 1Set Upgraded 3 Axis 3018 Pro CNC Router Engraving Milling Machine Kit.

3x Limit switches (XYZ axis). 1x GRBL 1.1f Control Board. 1x 775 spindle motor with ER11 Collet. 1x 24V DC 5A Power Supply.

10 x Tip 0.1 mm, 20°? 3.175 mm Drill Bits. 1x Spindle motor harness 60cm. 3x Stepper motor harness 60cm.

1x 4G USB flash drive include the english user manual & GRBL software. 100% Brand New and High Quality! Upgraded CNC 3018 PRO DIY Mini CNC Router Kit engraving machine. 11.8" x 7.1" x 1.8. 16.53" x13.78" x 10.63. Material: PA6 nylon & aluminum profile. Screw rod: T8 screw rod, lead 4mm, double copper nut to eliminate backlash. Collet (can be equipped with 0-7mm).

Step motor: Nema17 stepper motor. 34MM, 1.33A, 0.3N. Power supply : 24V 5.6A power adapter (input voltage 110-240VAC). Windows XP SP3, Win 7, Win 8, Win 10 (32/64 can be);Linux. Processing accuracy: about 0.2mm.

What materials can the milling cutter generally engrave or cut? Wood, acrylic (acrylic), pcb, pvb, soft metal, iron, glass, stone etc. What thickness of wood or acrylic can generally be cut by. Wood board (acrylic), speed setting 100, power setting 1000 by.

What format files does the Grbl control(Candle) software support? Support Gcode files of nc, ncc, ngc, tap, txt.

The X, Y and Z axis of the machine cannot be moved, what should I do? First check whether the wires are correctly connected, whether the power switch of the control board is pressed, and then check whether the coupling is off. What should I do if the control board cannot be connected? Exit the software, unplug the wire, and reconnect it.

775 spindle motor 100W 10000RPM. 100W spindle motor (12-36V) 24V:10000rpm/min.

M4 screw hole; Mounting hole pitch: about 29mm. 10pcs tip 0.1mm, 20 degree, diameter3.175mm. With E-stop & XYZ Limit switches. The upgraded cnc 3018 pro machine is with.

MOSFET recommendation 24V, current : within 10A. 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. 5.5-2.5mm DC interface.

Add emergency stop button port, probe port and XYZ limit port. Of limit switch, tool setting and emergency stop button are all. Add the outer casing: protect control board in transit, to avoid short circuit problem during use. Add the power button switch.

Cancel the drive module, use integrated imported stepper motor drive, with short circuit protection, and integrated heat dissipation aluminum alloy. Add the fan port to force heat dissipation. Add offline recognition, can insert offline modules and computers at the same time. Offline will automatically identify if there is computer control. Enhanced spindle drive, can support 20000rpm spindle.

Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong. The spindle drive increases the optocoupler isolation, which makes the control board generate less heat, and the spindle speed adjustment is more linear and safer. 2-pin port 2.54mm pitch.

3-pin port 2.54mm pitch. 2-pin port VH3.96mm pitch. Two engraving methods, can support 24V Spindle Motor and 12V 3A max PWM 3-pins modules. Our package comes with a spindle motor but without the module in the picture above. Compared with the old version.

Optimized the XYZ limit port and the port connected to the device, making wiring and operation easier. After installing the limit switch, when the XYZ axis moves beyond the travel of the engraving machine, the limit switch will trigger the machine to automatically stop the movement. This function can be used when an emergency stop is required at work, making our work safer and more efficient.

And move the power switch button from the bottom to the side, simple operation, more safety in the process of using the machine. Upgraded CNC 3018 PRO Mini CNC machine.

Small size, light weight, USB interface. GRBL control systems, great cnc router machine for beginers.

Upgraded 3018 PRO cnc machine is very easy to install, with stable structure. Main application:can be engraved. Plastic, wood, acrylic, pvc, pcb, wood and the like material.

Copper and aluminum and other metal materials. But can not carve hard metal, jade or other very hard texture of the items. If you change the spindle to a module, then also can carve the.

Kraft paper, wood, leather(wallet), bamboo, rubber. Q: The X, Y and Z axis of the machine cannot be moved, what should I do? A: First check whether the wires are correctly connected, whether the power switch of the control board is pressed, and then check whether the coupling is off. Q:What should I do if the control board cannot be connected? A:Exit the software, unplug the wire, and reconnect it.

Q: How to modify the parameters when the limit switch is activated? A: Enter 21=1 and 22=1 commands.

Q: The engraved image is reversed, what should I do? A: Enter 3=2 or RST=command. English user manual and GRBL software. File formats supported by the software. Software used to create Gcode. Carbide Create, Artcam, MeshCam, Fusion360, Inkscape etc. Please open the package and check if there are somedamages before sign, if there are some damages, please do not sign and contactus immediately. Pleasecheck out your address carefully when processing order. We are not responsiblefor wrong or undeliverable address. Pleasegive us the opportunityto resolve any problem when you have, we concern yourproblem and we will try our best to resolve it. We work hard to make sureEVERY CUSTOMER 100% satisfaction. Whenyou have the parcel, and not satisfied the goods or it is other problem like asbroken, pls tell us the detail reason and provide the photos to us. Item must be in it's original condition and nophysical damage.

We are online from Monday to Saturday.


UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine    UK? 3018 Pro DIY CNC Router Kit Aluminum Wood Miling Cutting Engraving Machine